At 145mm x 50mm, the symmetrical curved design allows for the installation of power and high density structured cabling systems including CAT5E, CAT6, Shielded, CAT7 and the new CAT6A 10 gig solution.
The high impact resistant uPVC, means the trunking systems are both sturdy and robust and able to accommodate a greater number of cables. They are produced from the highest quality uPVC, providing an aesthetically pleasing pure white finish.
To allow for a quick and simple installation, the Compact base and internal walls are pre-punched, and a hinged lid has been incorporated into the design to allow for cables to be fed into position with ease.
The trunking is available with a full range of fittings and accessories, including the moulded flat angles and tees, along with the newly designed two-piece adjustable bends to accommodate installations where 90 degree corners are unobtainable. ‘Screw fit’ fittings are available on request.
The system has been designed to accommodate the new open socket mounting frames. This utilises the full 50mm depth and allows for the use of deeper RJ45 Modules.
An optional pre-punched steel screen divider is available. This spans the width of the trunking and meets the requirements for power and data separation (BSEN50174-2).
ELITE Compact meets and exceeds the requirements for (BS6701), ISO/IEC11801(ED2.0 Amd 2) and Cenelec (BSEN50173 Part 1 / 2, BSEN50174-2) standards.
Please contact our Sales Team for further information on the range.
KEY DESIGN FEATURES
145mm x 50mm profile
Aesthetically pleasing curved design
Manufactured from high impact resistant uPVC compound
Suitable for Dado or Skirting mounting either vertically or horizontally
Hinged lids to support cables during installation
Large pre-punched knockouts located on both internal walls
Full range of fittings and accessories
Attractive two piece adjustable Internal & External covers to accommodate walls that do not have a true 90 degree
Internal and External Angles maintain necessary bend radius to comply with British, European and International standards
Moulded Flat Tee and Flat Angle with data guide to maintain necessary bend radius and cable segregation
Moulded Flat Tee and Flat Angle overlap trunking to prevent need of additional Joint Covers
Screw fit fittings available (optional)
1 & 2 Gang open sided frames
Pre-Punched Steel Screen Divider (BSEN50174-2)
DDA Compliancy obtainable
ELITE Compact Hygieia Range available – antimicrobial protection